Board-to-Board Stacking with 64 Signal Paths
The 0.114 inch (2.90 mm) post length is typical for a standard PCB thickness of 1.6 mm — the solder fillet forms on the bottom side without protruding past the board.
Where It Goes and What It Withstands
Phosphor bronze contacts provide good spring retention and corrosion resistance for repeated mating. The push-pull fastening means the connector is held by friction alone — no locking latch — so it is best suited for low-vibration applications where the mated pair is not subject to continuous shock or cable tug.
Sourced through independent distribution channels. The part ships in tube packaging.