The Amphenol 87894-116HLF is a 16-position, dual-row, unshrouded male pin header from the BERGSTIK® II series. It's a board-to-board interconnect on the standard 0.100" (2.54 mm) pitch grid, through-hole soldered, with all positions loaded. The square pins are plated with 30.0 µin gold or GXT on the mating surface — that thickness is good for repeated mating cycles and corrosive environments without contact resistance drift. Rated 5 A per contact at 110 V, it handles signal-level current and low-voltage power distribution inside an enclosure. The UL94 V-0 rated black housing is standard for equipment that needs a flame-rated interconnect.
This part is listed as Obsolete per the manufacturer. No official replacement or successor is recorded. If you have a BOM line with 87894-116HLF, the only channel is surplus or broker stock — we source it to order against an RFQ, with availability and pricing confirmed at quote time. For a new design, look at current BERGSTIK II variants at the same pitch and position count; the footprint and mating half are compatible, but pin length and plating options vary.
Push-pull fastening type — no latch, so it relies on friction from the receptacle contact force. In a vibration environment, a secondary retention method (wire tie, potting, or a locking header) is worth considering. The through-hole termination is solder-friendly and reworkable.