It uses the standard 0.100" (2.54mm) pitch on both rows and between rows, making it a direct footprint match for any legacy BergStik board layout. Rated for 5A per contact at 110V, with 30.0µin gold or GXT™ plating on the mating surface for repeated connect-disconnect cycles. The through-hole solder tails are 0.170" long, and the overall contact length is 0.588". The black UL94 V-0 housing is unshrouded, so the pins are exposed for mating with a standard female socket strip.
The 72 positions across two rows at 0.100" pitch. The 5A per-contact rating is typical for signal-level duty on a 0.100" pitch header.