The Amphenol 87900-114HLF is a BergStik II unshrouded dual-row male header, 14 positions loaded in a 2 × 7 arrangement on 0.100" (2.54 mm) pitch — the standard 0.100" grid that matches legacy perf-board and prototyping layouts. Rated 5 A per contact at 110 V, with 30.0 µ" (0.76 µm) gold or Gold, GXT™ plating on the mating surface. The through-hole solder tails are 0.120" (3.05 mm) long, and the overall contact length is 0.940" (23.88 mm), giving a 0.720" (18.29 mm) mating section for reliable board-to-board stacking. The black UL94 V-0 housing and push-pull fastening suit it for internal board-level interconnects where a shrouded header would add unnecessary bulk.
The 0.100" (2.54 mm) pitch is the de facto standard for 0.100" grid prototyping boards and legacy bus architectures — any board laid out on that grid accepts this header without a footprint change.
This is an unshrouded male pin header — it mates with any standard 0.100" (2.54 mm) pitch dual-row female socket or IDC receptacle that accepts square 0.025" (0.64 mm) pins. Termination is through-hole solder — the 0.120" (3.05 mm) post length suits standard 0.062" (1.6 mm) PCBs with room for a solder fillet on the bottom side.