Skip to main content
Log in
87900-128HLF — Amphenol product photo
Amphenol

87900-128HLF BERGSTIK II Header, 28 Pos, 0.100" Pitch, 5 A

MPN87900-128HLF
Active

Amphenol BERGSTIK® II unshrouded header, 28 positions, 2 rows, 0.100" (2.54 mm) pitch, through-hole solder termination, male pin, gold or GXT™ mating finish, 5 A, 110 V, UL94 V-0.

$2.5380Ref. price · indicative, final on quote
87900-128HLF datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

87900-128HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions28
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.120\" (3.05mm)
Overall contact length0.940\" (23.88mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.720\" (18.29mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

28-Position Dual-Row BERGSTIK® II Header

The 0.100" pitch gives you enough room for routing traces between pads without forcing a dense board stack-up. The unshrouded design keeps the per-unit cost low and makes visual inspection of the solder joints straightforward, but it does not provide the polarization or physical protection a shrouded header would — so board alignment during assembly needs attention. The through-hole termination (0.120" post length) gives a strong mechanical anchor compared to SMT, which matters when the mated assembly sees handling or vibration.

Frequently asked questions

What is the mating connector for 87900-128HLF?

This is an unshrouded male pin header. It mates with any standard 0.100" pitch, 28-position, dual-row female socket or IDC receptacle that accepts square pins. The specific mating part depends on your wire termination method (crimp, IDC, or solder cup) and whether you need a latch or polarization feature.

Does 87900-128HLF have a direct replacement?

No official direct replacement or cross-reference is listed for the 87900-128HLF. The BERGSTIK® II series includes many position and pitch variants, but a pin-compatible substitute would need to match the 28 positions, 0.100" pitch, dual-row layout, and through-hole termination exactly.