Skip to main content
Log in
87900-132HLF — Amphenol product photo
Amphenol

Amphenol FCI 87900-132HLF BERGSTIK II Header, 32-Pos

MPN87900-132HLF
Active

Amphenol FCI BERGSTIK® II, 87900-132HLF, 32-position dual-row unshrouded male header, 0.100" (2.54mm) pitch, through-hole solder, 5A per contact, 110V, gold or Gold GXT™ 30µin plating, UL94 V-0.

$5.0800Ref. price · indicative, final on quote
87900-132HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

87900-132HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions32
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.120\" (3.05mm)
Overall contact length0.940\" (23.88mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.720\" (18.29mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The Amphenol FCI 87900-132HLF is a 32-position dual-row unshrouded male header from the BERGSTIK® II series, on a standard 0.100" (2.54mm) pitch with matching 0.100" row spacing.

Footprint and fit

At 32 positions across two rows, this header fills a 16-per-row footprint on 0.100" pitch — a common grid that matches standard perf-board and many IDC ribbon-cable receptacles. The overall contact length is 0.940" (23.88mm), with a mating length of 0.720" (18.29mm) and a solder-post length of 0.120" (3.05mm). The insulation height sits at 0.100" (2.54mm) above the board surface. That 0.120" post is short — it suits single-sided boards or thin multilayer stacks where the solder tail doesn't need to reach far through the plated hole.

Frequently asked questions

Is the 87900-132HLF obsolete or still active?

The 87900-132HLF carries an Active lifecycle status per the manufacturer — full production, no end-of-life notice.

What is the current rating of the 87900-132HLF?

It is rated 5A per contact at 110V. The 30µin gold plating on the mating surface supports repeated connect/disconnect cycles without degrading the contact interface.