Board-to-Board Header for Standard 0.1" Grids
The Amphenol FCI 87901-114HLF is a 14-circuit, dual-row male header from the BERGSTIK® II series, built on the industry-standard 0.100" (2.54 mm) pitch. It is an unshrouded, through-hole solder header with push-pull fastening, intended for board-to-board stacking or wire-to-board mating with a compatible receptacle. The 14 positions are fully loaded in a 2-row layout (7 per row), and the 0.100" row spacing matches the pitch, so the footprint is a clean 2x7 grid that aligns with standard 0.1"-pitch IDC sockets and ribbon-cable receptacles. The housing is rated UL94 V-0, and the overall contact length of 1.040" (26.42 mm) with a 0.820" (20.83 mm) mating length and 0.120" (3.05 mm) solder post gives a standard through-hole footprint.
The 87901-114HLF sits at 14 positions in the BERGSTIK II dual-row unshrouded header line. Compared to the 10-position 87901-110HLF, the 14-position variant adds four circuits at the same 0.100" pitch and row spacing, so the board footprint extends by 0.400" in length while keeping the same 2-row width and solder-tail geometry. The choice between them is purely a circuit-count decision — the current rating, plating, and overall contact length are identical across the series.