Skip to main content
Log in
87901-436HLF — Amphenol product photo
Amphenol

Amphenol FCI 87901-436HLF BERGSTIK II Header, 36-Pos

MPN87901-436HLF
Active

Amphenol FCI BERGSTIK® II, 36-position, 2-row, 0.100" (2.54mm) pitch, unshrouded male header, through-hole solder termination, tin-plated phosphor bronze contacts, UL94 V-0, 5A at 110V.

$5.0500Ref. price · indicative, final on quote
87901-436HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

87901-436HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions36
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.120\" (3.05mm)
Overall contact length1.040\" (26.42mm)
Contact finish - matingTin
Contact length - mating0.820\" (20.83mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

Design Engineering Note: 87901-436HLF BERGSTIK II Header

It uses the industry-standard 0.100" (2.54mm) pitch for both the mating interface and row spacing, which means the board footprint is a straightforward 0.100" grid — no special pad geometry needed. The through-hole termination with a 0.120" (3.05mm) post length fits standard 0.062" to 0.093" PCBs.

It mates with any standard 0.100" pitch, 36-position, 2-row female socket or IDC receptacle that accepts a 0.025" square pin. The through-hole solder termination requires wave or hand soldering; there is no press-fit option. The 0.820" (20.83mm) mating pin length provides ample engagement depth for standard box headers or ribbon-cable receptacles.

Frequently asked questions

What is the pitch and pin count of 87901-436HLF?

The 87901-436HLF has 36 positions in 2 rows on a 0.100" (2.54mm) pitch, with the same 0.100" row spacing.

What is the mating connector for 87901-436HLF?

This unshrouded header mates with any standard 0.100" pitch, 36-position, 2-row female socket or IDC receptacle designed for 0.025" square pins.