Skip to main content
Log in
87901-464HLF — Amphenol product photo
Amphenol

Amphenol BERGSTIK II 87901-464HLF, 64-Pos 2.54mm Header

MPN87901-464HLF
Active

Amphenol FCI BERGSTIK® II 87901-464HLF, dual-row unshrouded male header, 64 positions (32 per row), 0.100" (2.54mm) pitch, through-hole solder termination, tin-plated contacts (100 µ" mating side), 5 A per contact at 110 V, UL94 V-0 black housing.

$8.3800Ref. price · indicative, final on quote
87901-464HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

87901-464HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions64
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.120\" (3.05mm)
Overall contact length1.040\" (26.42mm)
Contact finish - matingTin
Contact length - mating0.820\" (20.83mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

Board-to-Board Signal Header for Dense Routing

The Amphenol FCI 87901-464HLF is a 64-position, dual-row unshrouded male header from the BERGSTIK® II series, on the standard 0.100" (2.54mm) pitch. It carries 32 pins per row, making it a dense signal interconnect for parallel buses, I/O cards, or backplane mezzanine boards where every circuit needs a dedicated pin.

The 0.100" pitch matches standard breadboard and protoboard layouts — no custom footprint needed if your board uses 2.54mm grid spacing. For a board that gets assembled once and stays in an enclosure, the tin finish is fine.

Frequently asked questions

What is the mating connector for 87901-464HLF?

As an unshrouded male header on 0.100" pitch, it mates with any standard 0.100" pitch dual-row IDC socket or female header receptacle that accepts 64 positions. The push-pull fastening means no latch is required — the friction fit holds the pair together in a low-vibration environment.

Can 87901-464HLF be used with standard IDC cables?

Yes, the 0.100" pitch matches standard IDC ribbon cable on 0.100" centers. The 64 positions correspond to a 64-conductor ribbon. Watch pin-one orientation — the header is unshrouded, so the IDC socket's keying must align with the header's pin-one marker on the board silkscreen.