Amphenol BERGSTIK® II, 2-position unshrouded pin header, 0.100" (2.54 mm) pitch, single row, 5 A per circuit, gold-plated phosphor bronze contacts, through-hole solder termination, UL94 V-0 black insulator.
| Parameter | Value |
|---|---|
| Series | BERGSTIK® II |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Push-Pull |
| Voltage rating | 110V |
| Current rating | 5A |
| Contact material | Phosphor Bronze |
| Insulation color | Black |
| Insulation height | 0.100\" (2.54mm) |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board |
| Parameter | Value |
|---|---|
| Package | Bag |
| Shrouding | Unshrouded |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 2 |
| Contact length - post | 0.128\" (3.25mm) |
| Overall contact length | 1.058\" (26.87mm) |
| Contact finish - mating | Gold or Gold, GXT™ |
| Contact length - mating | 0.830\" (21.08mm) |
| Contact finish thickness - mating | 30.0µin (0.76µm) |
The Amphenol 87916-102HLF is a 2-position unshrouded pin header from the BERGSTIK® II series, built for board-to-board and wire-to-board interconnect on a standard 0.100" (2.54 mm) pitch. Typical use is as a low-cost board interconnect, programming header, or test point connector on prototype and production PCBs.
The 2-position count is the exact circuit count, not a partially loaded variant. The 0.100" pitch matches standard perfboard and breadboard footprints.
The 87916-102HLF uses a 0.100" (2.54 mm) pitch, which is the standard breadboard-compatible spacing and matches the common 0.100" header footprint.
It is rated 5 A per circuit. The current limit is set by the temperature rise in the unshrouded housing at the 0.100" pitch.