Rated 5 A per circuit at 110 V — the 5 A figure is per-contact at nominal temperature, so for a 22-circuit run that's up to 110 A distributed across the row if the PCB trace and mating receptacle can handle it.
Selection and Fit
The 0.830" (21.08 mm) mating pin length gives plenty of reach into a standard box-header or friction-lock receptacle; the 0.128" (3.25 mm) solder tail is short enough for single-sided boards but will protrude through a standard 1.6 mm PCB. For a BOM line match, confirm the 22 positions — this is a fully loaded single row, so every pin position is populated.
As an unshrouded header, this mates with any standard 0.100" (2.54 mm) pitch female receptacle that accepts 0.025" square pins — common choices include the Amphenol FCI DUBOX or BergStik receptacle housings, as well as industry-standard IDC sockets and crimp housings from multiple manufacturers. No keying or polarization beyond the pin layout itself; orientation is set by the PCB footprint.
This is a current-production line item, not a phase-out or NRND part. Contact the storefront with your BOM quantity for a same-day quote.