Skip to main content
Log in
Amphenol 87916-129HLF — Pin Headers, Sockets & Housings

FCI 87916-129HLF BergStik II Header, 29 Pos, 0.100" Pitch

MPN87916-129HLF
Active

FCI BergStik II, 87916-129HLF, unshrouded single-row header, 29 positions, 0.100" (2.54mm) pitch, through-hole solder termination, gold-plated square pins, 5A current rating, UL94 V-0.

$3.4774Ref. price · indicative, final on quote
Amphenol 87916-129HLF datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Aug 2026

Specifications

87916-129HLF key specifications
ParameterValue
SeriesBERGSTIK® II
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board

All specifications

87916-129HLF additional specifications
ParameterValue
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions29
Contact length - post0.128\" (3.25mm)
Overall contact length1.058\" (26.87mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.830\" (21.08mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The 0.100" pitch and 0.128" (3.25mm) post length are the two dimensions that determine the PCB footprint. The post length is on the shorter side for a through-hole header — it suits boards around 1.6mm thick where the solder tail does not need to protrude far past the bottom side. The overall contact length of 1.058" (26.87mm) includes a 0.830" (21.08mm) mating pin section, which gives good reach for mating with standard BergStik receptacle housings.

The base product number is 87916, which covers the full BergStik II header family in this pitch and row configuration.

Frequently asked questions

What is the compatible mating connector for the 87916-129HLF?

This unshrouded header mates with any standard BergStik II receptacle housing or IDC socket that matches the 0.100" pitch and 29-position single-row layout. The mating half must have the same position count and row configuration — the unshrouded design means no keying mismatch beyond the physical pin pattern.

What is the pitch and position count of the 87916-129HLF?

The 87916-129HLF has 29 positions on a 0.100" (2.54mm) pitch in a single row, with all positions loaded.