Skip to main content
Log in
87916-407HLF — Amphenol product photo
Amphenol

Amphenol FCI 87916-407HLF BERGSTIK II Header, 7 Pos

MPN87916-407HLF
Active

Amphenol FCI BERGSTIK® II, 87916-407HLF, unshrouded single-row header, 7 positions, 0.100" (2.54mm) pitch, 5A per circuit at 110V, tin-plated phosphor bronze contacts, through-hole solder termination, UL94 V-0 black housing.

$0.7289Ref. price · indicative, final on quote
87916-407HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

87916-407HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions7
Contact finish - postTin
Contact length - post0.128\" (3.25mm)
Overall contact length1.058\" (26.87mm)
Contact finish - matingTin
Contact length - mating0.830\" (21.08mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

Rated 5A per circuit at 110V, it handles signal-level power and low-current sensor feeds, not bus-bar duty.

The 0.100" (2.54mm) pitch and 0.830" (21.08mm) mating pin length give enough reach to mate with standard 0.100" pitch crimp receptacles or IDC sockets — the long pins clear thicker boards or dual-row receptacles. The overall contact length of 1.058" (26.87mm) and a post length of 0.128" (3.25mm) mean the solder tail sits through a standard 1.6mm PCB with room for a wave-solder fillet. The black PA6T material handles typical reflow and wave-solder profiles without warping.

Frequently asked questions

Where can I buy the 87916-407HLF?

Submit your BOM quantity to the storefront for a same-day quote with current pricing and availability.

What is the pitch of the 87916-407HLF?

The pitch is 0.100" (2.54mm), the standard spacing used on breadboards, perfboards, and DIP-style layouts.

What is the current rating of the 87916-407HLF?

The header is rated 5A per circuit at 110V — suitable for signal-level power, logic rails, and sensor feeds, not high-current bus-bar duty.

What female connector mates with the 87916-407HLF?

It mates with any standard 0.100" (2.54mm) pitch crimp receptacle housing or IDC socket that accepts 0.025" square pins. The unshrouded design means the mating half must provide its own polarization or keying.