The Amphenol FCI 87916-434HLF is a 34-position, single-row, unshrouded male pin header from the BERGSTIK® II series, on the standard 0.100" (2.54 mm) pitch. It's a through-hole solder termination header with push-pull fastening, designed for board-to-board interconnect where a low-profile, breakaway-style pin strip is needed. The contacts are phosphor bronze with a 100.0 µ" (2.54 µm) tin plating on the mating surface and tin on the solder posts, rated for 5 A per contact at 110 V.
At 34 positions loaded, this header fills a BOM line for a higher-density single-row interconnect. The unshrouded design means it mates with standard IDC sockets, female header strips, or crimp housings on the same 0.100" pitch — a common configuration for ribbon cable transitions or mezzanine board connections.
No official direct-replacement part number has been issued, so the BOM line should retain this order code unless a pin-compatible alternative from the same BERGSTIK® II family is evaluated.