35-Position Right-Angle Board-to-Board Receptacle
The 89882-435LF: The push-pull fastening means it mates and unmates without a locking latch, so it suits applications where the connector pair sees periodic disconnection for service or reconfiguration. Tin plating at this thickness gives adequate corrosion protection for indoor environments and supports a moderate mating cycle count — typically 50 to 100 cycles before contact resistance begins to climb.
Board Fit and Mounting Details
The solder post length is 0.114" (2.90 mm) — enough for a standard 1.6 mm thick PCB with through-hole solder joints that don't wick up into the contact body.
The base product number is 89882, which covers the Dubox single-row receptacle family. No direct pin-compatible replacement from Amphenol ICC is listed; if a cross-shop is needed, the pitch, circuit count, and right-angle orientation are the matching constraints.