SMA Panel Receptacle, 50 Ohm, DC to 12.4 GHz
The 901-10065: The flange-mount panel installation with threaded coupling makes it a standard bulkhead feedthrough for enclosures, test boxes, or RF front-end panels where the signal path needs a clean transition through a wall. The nickel-plated brass body and PTFE dielectric are the usual build for this class of SMA connector — nothing exotic, but the materials are proven for the band. Insertion loss is held to 0.25 dB across the range, which keeps the link budget tight even at the upper frequency edge.
What the 12.4 GHz Rating Means for the Fit
This SMA receptacle is specified to 12.4 GHz, covering the standard SMA band. If your signal path stays at or below 12.4 GHz, this is the right impedance-matched part.
Panel Mounting and Termination Details
Mounting is panel-mount with a flange — four holes for the flange screws, plus the threaded body for the mating SMA plug. The threaded fastening type means the mating half screws on, giving a vibration-resistant connection that won't back off under shock. The extended insulation feature provides additional dielectric creepage distance, which matters when the connector is mounted in a panel with nearby ground planes or when the signal carries a DC bias. Bulk packaging means the part ships loose, not on a reel — expected for a panel-mount RF connector.