SMA Plug Kit for LMR-100 — What's in the Bag
The Amphenol RF 901-10604 is a field-install SMA plug kit built for LMR-100 cable. The kit includes five pieces: the connector body with a male pin, a crimp ferrule, a heat-shrink tube, and an insulator — everything needed for one termination. The connector is a standard SMA plug, threaded coupling, 50 Ohm impedance, rated DC to 12.4 GHz. The shield terminates via crimp, the center conductor via solder.
Cable Match and Termination
This kit is specifically dimensioned for LMR-100, a flexible low-loss coax with a nominal 0.100-inch diameter. The crimp ferrule and heat shrink are sized to the cable jacket; the insulator matches the dielectric diameter. The shield termination is crimp — the ferrule compresses onto the braid — while the center pin is soldered to the conductor.
Rated to 12.4 GHz, the 901-10604 covers L-band, S-band, and most of C-band — typical for Wi-Fi, cellular backhaul, and ISM-band radio links. The 50 Ohm impedance is standard for 50-ohm system designs.