Skip to main content
Log in
901-10753 — Amphenol product photo
Amphenol

Amphenol RF 901-10753 SMA Jack, 50 Ohm, 6 GHz, Bulkhead

MPN901-10753
Active

Amphenol RF SMA jack, female socket, 50 Ohm, DC to 6 GHz, bulkhead front-side nut mount, gold-plated brass body, crimp shield / solder center pin, 500 mating cycles, -65 to 165 °C.

$11.8200Ref. price · indicative, final on quote
901-10753 datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

901-10753 Technical Specifications
ParameterValue
Mounting typePanel Mount
Connector typeJack, Female Socket
Fastening typeThreaded
Voltage rating335 V
Frequency - max6 GHz
Mounting featureBulkhead - Front Side Nut
Cable group0.81mm OD Coaxial Cable
Operating temperature-65°C ~ 165°C
Body materialBrass
Housing colorGold
Dielectric materialPolytetrafluoroethylene (PTFE)
Center contact materialBeryllium Copper
PackageBag
Impedance50 Ohms
Body finishGold
Mating cycles500
Number of ports1
Shield terminationCrimp
Contact terminationSolder
Center contact platingGold

Product details

SMA Bulkhead Jack for 0.81 mm Coax

The Amphenol RF 901-10753 is a standard SMA jack — female socket, 50 Ohm impedance, threaded coupling — built for bulkhead mounting with a front-side nut. It handles DC through 6 GHz, which covers most sub-6 GHz wireless, instrumentation, and test applications without breaking a sweat.

Cable Prep and Termination

This jack terminates to 0.81 mm OD coaxial cable. Shield termination is crimp; the center conductor solders into the beryllium copper contact.

Mounting and Environmental Range

Mounts through a bulkhead panel with a front-side nut — you drop the jack through from the outside and tighten the nut from behind. That keeps the connector flange visible and accessible for torqueing. The threaded fastening type means the mating half locks positively; no push-pull, no snap — just a full-turn coupling nut that won't back off under vibration.

Frequently asked questions

Is the 901-10753 compatible with RG-178 cable?

Yes — the 901-10753 is specified for 0.81 mm OD coaxial cable, which is the standard diameter for RG-178 and similar thin coax. The crimp shield termination and solder center pin match the cable construction.

Is 901-10753 SMA or RP-SMA?

It is a standard SMA jack with a female socket and threaded coupling. This is not reverse-polarity (RP-SMA) — the center contact is a socket, and the threads are internal, matching standard SMA male plugs.