Skip to main content
Log in
91276-413HLF — Amphenol product photo
Amphenol

Amphenol BERGSTIK II 91276-413HLF, 13-position 0.100" Header

MPN91276-413HLF
Active

Amphenol BERGSTIK II, 13-position 1-row unshrouded header, 0.100" (2.54 mm) pitch, 5 A, 110 V, tin-plated square pins, through-hole solder, UL94 V-0 black housing.

$1.6900Ref. price · indicative, final on quote
91276-413HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

91276-413HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions13
Contact finish - postTin
Contact length - post0.225\" (5.72mm)
Overall contact length1.225\" (31.12mm)
Contact finish - matingTin
Contact length - mating0.900\" (22.86mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

The Amphenol BERGSTIK II 91276-413HLF is a 13-position, single-row unshrouded header on the standard 0.100 inch (2.54 mm) pitch. It uses square tin-plated male pins with a 0.900 inch mating length and a 0.225 inch solder tail for through-hole mounting.

The 0.100 inch pitch is the breadboard-friendly spacing — it drops into standard 0.1 inch perfboard and matches legacy DIP socket footprints. The 13-position count is an oddball; double-check your BOM line because it's not a standard 12 or 14. The unshrouded design means no polarization key; you're relying on visual alignment or the mating receptacle's own keying to avoid a 180-degree mis-mate.

No official cross-reference or successor listed.

Frequently asked questions

Where can I buy the 91276-413HLF and get a price?

Contact the storefront with your BOM quantity for a same-day quote.

What is the pitch of the 91276-413HLF?

The pitch is 0.100 inch (2.54 mm), the standard breadboard-compatible spacing.

Does the 91276-413HLF mate with a standard female socket?

Yes, it mates with any standard 0.100 inch pitch female socket strip or IDC receptacle — push-pull retention, no locking latch.