Board Layout Fit for 2.00mm Dual-Row Signal
The 91596-024TRLF: The 2.00mm pitch and 0.079" row spacing set a compact 48-position footprint on 24 circuits — routing two signals between vias on a standard 0.5mm trace/space board is tight but doable. Bottom-entry orientation means the receptacle sits flush against the PCB, with contacts accessible from the underside — this mates with a header that passes through a board cutout, saving z-height in a mezzanine stack. Rated 1A per contact at 200V with beryllium copper contacts and gold flash plating — the 8µin gold on the mating face handles moderate cycling (50–100 mates) before wear-through; for high-cycle or corrosive environments, step to a thicker gold sibling in the series.
This is a Minitek 2.00mm female socket receptacle — mates with the corresponding Minitek 2.00mm male header (pin header, straight or right-angle) from the same series. Termination is solder-only, surface-mount, on tape-and-reel with pick-and-place feature — the flat plastic body and centred vacuum pickup area suit automated assembly.
The base part number is 91596; the 'TRLF' suffix indicates tape-and-reel packaging with RoHS compliance (lead-free finish). UL94 V-0 rated plastic housing meets equipment-level flammability requirements.