Minitek 2.00mm Bottom-Entry Receptacle — 14 Positions, 30µin Gold
The 91596-114LF: The bottom-entry orientation (contacts accessed from the underside of the connector body) suits applications where the mating plug approaches from below the PCB, common in mezzanine stacking or right-angle cable assemblies. Push-pull fastening means the connector mates and unmates without a locking latch — fine for low-vibration environments or where quick disconnect is needed, but not for automotive or heavy machinery without secondary retention.
Surface Mount Termination and Board Fit
Surface mount solder tails with gold flash post-plating — the gold flash on the solder joint side is thin enough to dissolve into the solder fillet during reflow, leaving a reliable tin-lead or SAC joint. The 0.091-inch (2.30mm) insulation height gives clearance for traces or vias under the connector body on the top layer — useful when routing signals between the two rows.