Board-to-Board Fit: 2.00mm Pitch, Bottom Entry
The housing material is rated UL94 V-0, which is the standard flame-retardant grade for equipment inside an enclosure.
This is a female socket receptacle with square contacts, push-pull fastening. It mates with a 2.00mm-pitch pin header — the mating half is a standard Minitek® 2.00mm header with 0.079" (2.00mm) row spacing. The bottom-entry design means the header pins insert from the opposite side of the PCB, so confirm the board stack-up before layout. Termination is surface mount (SMT), with solder reflow as the attachment method. The contact material is beryllium copper, which provides good spring properties and fatigue resistance over repeated mating cycles. The insulation height is 0.091" (2.30mm) — this sets the clearance under the connector body on the board.