BERGSTIK II Header, 14 Positions, Unshrouded
The Amphenol FCI 92417-114HLF is a 14-position, dual-row unshrouded header from the BERGSTIK® II series, built on the standard 0.100" (2.54 mm) pitch. It is a through-hole solder-terminated board-to-board connector with push-pull fastening, designed for general-purpose signal and low-power interconnect on a 2.54 mm grid footprint.
Key Specs and What They Mean for the Fit
The 0.100" pitch matches the standard DIP IC footprint — board layout is straightforward for prototyping or production runs, and it mates with any 0.100" pitch IDC receptacle or female header. The 14 positions in a 2x7 dual-row layout cover common I/O and signal counts for industrial control, computing, and test equipment. Rated 5 A per circuit at 110 V, the contacts are sized for signal-level power and logic-level I/O — not a bus bar, but sufficient for most header duties on a board. The 30.0 µin gold plating on the mating surface gives a solid cycle life for moderate mating counts, better than a thin flash for repeated connections. The unshrouded design means no polarisation key — the mating half must be aligned manually, which is typical for board-stacking and low-cost harness assemblies where the connector is not subject to high vibration. The UL94 V-0 black insulation suits equipment inside an enclosure requiring a flame rating.