Skip to main content
Log in
92417-140HLF — Amphenol product photo
Amphenol

FCI 92417-140HLF BergStik II Header, 40 Pos, 0.100" Pitch

MPN92417-140HLF
Active

FCI / Amphenol BergStik® II, Board-to-Board Header, 92417-140HLF, 40 Positions, 2 Rows, 0.100" (2.54mm) Pitch, Through Hole, Solder Termination, Gold Mating Finish.

$5.3900Ref. price · indicative, final on quote
92417-140HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

92417-140HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions40
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.110\" (2.79mm)
Overall contact length0.530\" (13.46mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.320\" (8.13mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The FCI / Amphenol 92417-140HLF is a 40-position, dual-row BergStik® II unshrouded pin header. It sits in the standard 0.100" (2.54mm) pitch grid, with the same 0.100" row spacing, making it a drop-in fit for standard perfboard and 2.54mm-pitch receptacles.

The 0.100" (2.54mm) pitch and row spacing are the industry-standard grid — this header mates with any standard 0.100" pitch IDC socket or crimp receptacle housing (e.g., the matching BergStik II or similar dual-row 0.100" receptacles). The 40 positions, fully loaded across two rows, match a 40-conductor ribbon cable or a 40-position receptacle.

The unshrouded, push-pull design means no polarization key — the board layout and receptacle orientation are the only mis-mating protection.

Frequently asked questions

What is the pitch of the 92417-140HLF?

The 92417-140HLF has a 0.100" (2.54mm) pitch on both the mating interface and the row spacing.

What is the recommended mating connector for the 92417-140HLF?

The 92417-140HLF mates with any standard 0.100" (2.54mm) pitch dual-row receptacle, such as a BergStik II or equivalent IDC socket or crimp housing.

Is the 92417-140HLF compatible with standard 2.54mm headers?

Yes, the 0.100" (2.54mm) pitch and row spacing make it compatible with standard 2.54mm grid receptacles and prototyping boards.