The Amphenol 92417-224HLF is a 24-position dual-row unshrouded male pin header from the BERGSTIK® II series, designed for board-to-board interconnect applications. It uses a standard 0.100" (2.54mm) pitch on both rows and between rows, matching the footprint of legacy and current-generation IDC receptacles and other 0.100" headers. The 15.0 µin gold plating on the mating surface gives it a solid duty cycle for repeated matings in test fixtures or modular assemblies, while the tin solder tails keep the board-side termination cost reasonable. Rated 5 A per contact and 110 V, it handles signal-level current and moderate voltage without issue — the current limit is typical for this pin density and pitch class, and the 0.100" insulation height keeps creepage adequate for the 110 V rating. The UL 94 V-0 housing means it's acceptable for equipment inside an enclosure that requires a flame rating.
What the ratings mean for fit
The 0.100" pitch matches the legacy BergStik and other industry-standard headers. The 15.0 µin gold on the mating surface supports hundreds of mating cycles in a clean environment.