The FCI 92417-412HLF is a 12-position, dual-row unshrouded header from the BERGSTIK® II series, built on the industry-standard 0.100" (2.54 mm) pitch. The post finish is also tin, matching standard solder processes. The black UL94 V-0 rated insulation height is 0.100" (2.54 mm), keeping the mated stack height low for tight board spacing. The tin plating means it is not intended for high-cycle field service; it is a cost-optimized choice for internal board connections or cable assemblies that mate once during manufacturing.
The 0.100" (2.54 mm) pitch and 0.100" row spacing are the defining footprint dimensions. The overall contact length is 0.530" (13.46 mm), split into a 0.320" (8.13 mm) mating length and a 0.110" (2.79 mm) solder post. As an unshrouded header, the pins are fully exposed. For blind-mate or high-vibration assemblies, a shrouded header or a guide-frame is recommended.
It is a current-production BERGSTIK® II series part, sourced through independent distribution channels. The 12-position, 0.100" pitch, dual-row unshrouded header format is a standard footprint shared by many manufacturers, but pin length, plating thickness, and material grades vary — verify the mating length and post length against your board stack-up before substituting.