The Amphenol FCI 92417-438HLF is a 38-position, dual-row unshrouded male header from the BERGSTIK® II series. It uses the standard 0.100" (2.54 mm) pitch on both rows and between rows, which means it drops onto a standard 0.100" grid footprint — no special pad layout needed. The 38 circuits are all loaded, so the BOM position count matches the pin count directly. Rated 5 A per circuit at 110 V, this is a signal-level interconnect — the current rating is typical for logic-level or low-power I/O, not for bus-bar or motor-drive duty. The tin-on-tin contact system (100 µ" tin on the mating surface, tin on the post) is suited for moderate mating-cycle applications inside an enclosure where the connector is mated once or a few times over the product life. The through-hole solder termination with a 0.110" post length fits standard PCBs. The UL94 V-0 black insulator is the standard flame rating for equipment inside an enclosure.
Where it fits on the board
The 0.100" pitch and 0.100" row spacing place this header on a square grid — every pin sits at the intersection of a 0.100" x 0.100" array. The 0.320" mating pin length gives enough engagement depth for standard box headers or IDC receptacles without bottoming out. Overall contact length is 0.530" from the seating plane to the pin tip.