Skip to main content
Log in
92417-440HLF — Amphenol product photo
Amphenol

FCI 92417-440HLF BERGSTIK II Header, 40 Pos, 2.54 mm Pitch

MPN92417-440HLF
Active

FCI BERGSTIK® II, 40 Position Header, 0.100" (2.54mm) Pitch, 2 Row, Unshrouded, Through Hole, Solder Termination, Tin Plating, 5A.

$8.3900Ref. price · indicative, final on quote
92417-440HLF datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

92417-440HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions40
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.110\" (2.79mm)
Overall contact length0.530\" (13.46mm)
Contact finish - matingTin
Contact length - mating0.320\" (8.13mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

The FCI 92417-440HLF is a 40-position, dual-row BERGSTIK® II unshrouded header on the standard 0.100" (2.54 mm) pitch — a workhorse board-to-board interconnect for through-hole PCB layouts. The 0.530" (13.46 mm) overall contact length breaks down to a 0.320" (8.13 mm) mating section and a 0.110" (2.79 mm) post for the board.

Footprint and fit

The 0.100" (2.54 mm) pitch and 0.100" (2.54 mm) row spacing place the 40 pins on a 20x2 grid that fits the standard 0.1-inch perfboard or protoboard layout — no footprint surprises for a breadboard prototype or a production PCB.

What the tin plating means for the duty

This header is best suited for a permanent or infrequently disconnected board-to-board link, not a field-service harness that sees repeated unmate/mate. The 5 A per-contact rating holds at room ambient; derate above 25 °C per the standard curve for the phosphor bronze contact beam.

Frequently asked questions

Where can I buy 92417-440HLF available via RFQ confirmation?

The 92417-440HLF is sourced to order against an RFQ through independent distribution — current availability and pricing are confirmed at quote time. Submit your BOM quantity for a same-day quote.

Can 92417-440HLF be used for 2.54mm pitch PCBs?

Yes — the 0.100" (2.54 mm) mating pitch is the standard 2.54 mm grid, so it fits directly on a 2.54 mm pitch PCB land pattern.

What is the difference between 92417-440HLF and other BergStik II headers?

The key differentiator is the 40-position count in a dual-row, unshrouded form with tin plating — other BergStik II variants offer different position counts (from a few to 50+), gold plating options, or shrouded versions. This one is a straight through-hole, push-pull mate, fully loaded across both rows.