It carries a 0.100" (2.54mm) pitch on both the row spacing and the mating interface, which matches the standard 0.100" grid for prototyping and production layouts. Rated 5 A per contact at 110 V, with a full tin-plated mating surface at 100.0µin (2.54µm) thickness — the heavy tin layer gives good corrosion resistance and a stable contact resistance over multiple insertion cycles in dry-circuit or low-power signal applications.
The 0.100" pitch and 0.100" row spacing place the 46 pins on a standard 0.100" grid — the footprint is a 2 x 23 array of 0.040" square pins. The overall contact length is 0.530" (13.46mm), with a mating length of 0.320" (8.13mm) and a post length of 0.110" (2.79mm). That post length is short — it fits a standard 0.062" board with through-hole solder, but the board thickness and plated-through-hole depth need to be checked against the 0.110" post for full solder fillet. Through-hole mounting with push-pull fastening; no locking ramp, so the mating half relies on friction retention.
The part is RoHS-compliant. Active lifecycle status.