Skip to main content
Amphenol 92417-450HLF — Pin Headers, Sockets & Housings

Amphenol/FCI BergStik II 92417-450HLF, 50-Pos, 2.54mm Pitch

MPN92417-450HLF
Active

Amphenol/FCI BergStik® II, Board to Board, Header, 50 Positions, 2.54mm Pitch, 2 Rows, Through Hole, Solder, Tin Plating, 5A, 110V.

$1.4311Ref. price · indicative, final on quote
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

92417-450HLF key specifications
ParameterValue
SeriesBERGSTIK® II
TypeMale Pin
MountingThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board

All specifications

92417-450HLF additional specifications
ParameterValue
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions50
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.110\" (2.79mm)
Overall contact length0.530\" (13.46mm)
Contact finish - matingTin
Contact length - mating0.320\" (8.13mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

The Amphenol/FCI 92417-450HLF is a 50-position unshrouded male pin header from the BergStik® II series, built for board-to-board stacking on a 2.54mm pitch. It carries two rows of square pins, all positions loaded, with a push-pull fastening system — no latch, no locking ramp, just straight pin-and-socket retention. The 5A per-contact rating and 110V voltage ceiling suit it for signal-level interconnects and moderate power distribution inside an enclosure, where the UL94 V-0 housing meets the flame rating requirement for equipment-grade assemblies.

The 100.0µin (2.54µm) tin plating on the mating surface provides a contact interface for moderate mating cycle counts.

Frequently asked questions

Does 92417-450HLF have a locking feature?

No — the fastening type is push-pull, meaning the header relies on contact friction for retention. There is no latch, locking ramp, or screw-lock. For vibration-prone applications, consider a shrouded BergStik header with a locking ramp or add a board-level retention method.

Is 92417-450HLF RoHS compliant?

The tin plating and phosphor bronze contact material are consistent with RoHS-compliant construction, though no separate RoHS certificate is on file for this specific order code. The series baseline is RoHS-compliant.