The Amphenol FCI 92634-414HLF is a 14-position, dual-row unshrouded header from the BERGSTIK II series. It uses a 0.100" (2.54mm) pitch on both the pin-to-pin and row spacing, making it a standard footprint for board-to-board and wire-to-board interconnects. The right-angle through-hole orientation places the pins parallel to the PCB, which suits board-edge or mezzanine-style connections where the mating axis runs along the board surface. Rated at 5 A per circuit with a 110 V voltage rating, this header handles moderate signal and power duty. The tin-plated mating finish at 100.0 µin (2.54 µm) provides adequate corrosion resistance for typical indoor environments, though the per-contact current should be derated above 25 °C ambient per the manufacturer's curve. The UL94 V-0 housing meets the flame rating required for equipment inside enclosures.
What it mates with and how it terminates
This is an unshrouded header with push-pull fastening — no locking latch, so it relies on the friction of the mating receptacle for retention. It accepts the matching BERGSTIK II dual-row receptacle housing (sold separately) that uses crimp terminals. The through-hole solder tails are 0.318" (8.08 mm) long, designed for standard 0.062" to 0.093" PCB thickness. The square 0.025" pins are compatible with IDC or crimp-socket receptacles of the same pitch.