The Amphenol ICC 92634-422HLF is a 22-position, dual-row unshrouded header from the BERGSTIK® II series, built for board-to-board stacking and wire-to-board interconnect where a standard 0.100" pitch footprint is needed. It carries tin-plated square pins on both the mating and solder sides, with a 100.0µin (2.54µm) mating finish thickness that gives it solid corrosion resistance for indoor, low-cycle applications.
The 0.100" (2.54mm) pitch and 0.100" row spacing are the industry-standard grid for pin headers — your board footprint is a 22-hole 2.54mm-pitch pattern, two rows of 11. The 5A per-contact rating is typical for a tin-plated square pin at this pitch; the real current limit is set by the temperature rise in the housing, so if you push all 22 pins at 5A you'll need to derate. The 110V voltage rating is conservative for signal-level work — fine for logic, sensor, and low-power DC rails. The unshrouded design means there's no polarization key or latch — you rely on the mating receptacle's own retention (usually a friction lock or a separate latch housing). The right-angle solder tails are 0.318" (8.08mm) long, which gives enough standoff for through-hole soldering on a standard 1.6mm PCB.