The 92634-448HLF is a 48-position unshrouded header from the BERGSTIK® II series, designed for board-to-board stacking. It carries two rows of square male pins on a 0.100" (2.54mm) pitch — the standard legacy grid that matches common perfboard and prototype footprints. The right-angle through-hole termination places the pins parallel to the PCB, useful for edge-mounted daughtercards or mezzanine connections where the board-to-board axis runs parallel to the main board.
Key specs and what they mean for the build
Rated 5A per contact at 110V — enough for signal distribution and moderate power rails on a board, but not bus-level current. The tin-on-tin contact finish (100.0µin / 2.54µm on the mating side) is a workhorse for cost-sensitive assemblies with limited mating cycles; tin frets under vibration if unmated and remated often, so this header suits semi-permanent connections or low-cycle field service. The UL94 V-0 black housing meets the flame rating required for equipment inside an enclosure. All 48 positions are loaded — no empty slots to work around on the BOM.