Skip to main content
Log in
92634-462HLF — Amphenol product photo
Amphenol

92634-462HLF BergStik II Header, 62 Pos, 0.100" Pitch, 5A

MPN92634-462HLF
Active

FCI / BergStik® II, 92634-462HLF, unshrouded header, 62 positions, 2 rows, 0.100" (2.54mm) pitch, 5A, 110V, through-hole right-angle, tin mating finish.

$5.3428Ref. price · indicative, final on quote
92634-462HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

92634-462HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.190\" (4.83mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions62
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.318\" (8.08mm)
Contact finish - matingTin
Contact length - mating0.318\" (8.08mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

Board-to-Board Header, 62 Positions, 0.100" Pitch

The 92634-462HLF is a 62-position, dual-row unshrouded header from the BergStik® II series, built for board-to-board or wire-to-board interconnect on a standard 0.100" (2.54mm) pitch grid. The black UL94 V-0-rated housing keeps it compliant for equipment inside an enclosure.

This is a signal-duty or low-cycle interconnect, not a high-reconnect power bus. The 0.318" mating and post lengths give enough reach for a typical 0.062" PCB with room for a through-hole solder fillet.

Right-Angle Mounting and Board Layout

The 0.318" post length is long enough to clear a standard 0.062" board with a solder fillet on the back side.

Frequently asked questions

What is the pitch of 92634-462HLF?

The pitch is 0.100" (2.54mm), which is the standard breadboard-compatible spacing for this BergStik® II header.

Is 92634-462HLF RoHS compliant?

RoHS compliance is not explicitly stated in the available specifications for this part. Confirm with the supplier at quote time.

What is the mating connector for 92634-462HLF?

This unshrouded header mates with any standard 0.100" pitch dual-row receptacle or IDC socket that fits the 0.318" mating pin length. The matching BergStik® II receptacle housing is the typical mating half.