Skip to main content
Log in
92634-472HLF — Amphenol product photo
Amphenol

Amphenol BERGSTIK II 92634-472HLF, 72-Pos 2.54mm Header

MPN92634-472HLF
Active

Amphenol ICC (FCI) BERGSTIK® II, Board to Board Header, 72 Positions, 2 Row, 0.100" (2.54mm) Pitch, Through Hole, Right Angle, Tin, 5A.

$8.0352Ref. price · indicative, final on quote
92634-472HLF datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

92634-472HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.190\" (4.83mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions72
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.318\" (8.08mm)
Contact finish - matingTin
Contact length - mating0.318\" (8.08mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

It uses a 0.100" (2.54mm) pitch on both the pin-to-pin and row-to-row spacing, matching the standard grid for legacy ribbon-cable IDC connectors and prototyping boards. Each square pin is phosphor bronze with a 100.0 µin (2.54 µm) tin finish on the mating surface and tin on the solder tail. The 5 A per-contact rating is typical for a 0.100" pitch tin-plated header — adequate for signal-level loads and moderate power distribution within a board assembly.

Mating and Compatibility

The 0.318" (8.08mm) mating pin length provides enough engagement depth for standard box-type receptacles. The 0.318" (8.08mm) post length allows for through-hole soldering on boards up to about 0.093" thick with room for a solder fillet. The 2.54mm pitch is compatible with standard 0.100" IDC connectors, so this header can serve as the board-mount half for a ribbon-cable harness.

Frequently asked questions

Where can I buy the 92634-472HLF?

The 92634-472HLF is sourced to order against an RFQ through independent distribution. Contact the storefront with your BOM quantity for a same-day quote — current pricing and stock availability are confirmed at quote time.

What is the recommended mating connector for the 92634-472HLF?

This unshrouded header mates with any standard 0.100" (2.54mm) pitch dual-row female socket, such as a BergStik II receptacle housing with crimp terminals or an IDC ribbon-cable connector. There is no keying, so alignment depends on the board layout.

Is the 92634-472HLF RoHS compliant?

The 92634-472HLF is listed with tin-plated contacts and a UL94 V-0 black insulation, consistent with RoHS-compliant materials. Confirm the specific RoHS certification on the manufacturer's product drawing for your compliance file.

What is the pinout of the 92634-472HLF?

The 92634-472HLF is a 72-position, 2-row header with all positions loaded. Pin 1 is typically marked with a square pad or silkscreen indicator on the PCB layout. The row spacing is 0.100" (2.54mm), and the pin-to-pin pitch within each row is also 0.100".