The Amphenol BERGSTIK® 93690-101-10LF is a 10-position, dual-row unshrouded breakaway header on the standard 0.100" (2.54mm) pitch — the same grid as breadboard and legacy through-hole layouts. The Gold GXT™ plating on the mating side at 30.0µin (0.76µm) gives it the cycle life for repeated mating and unmating, while the tin-plated posts (39.4µin / 1.00µm) solder or press-fit cleanly into plated through-holes.
The 0.100" (2.54mm) pitch matches standard perfboard and legacy 0.1-inch grid layouts — no footprint adjustment needed if you're replacing a classic Berg or similar header. 10 positions loaded all mean the BOM line count is exactly what you see; no partial-population variants to track. The unshrouded design (no polarization wall) means the assembler must align the mating connector visually — not a blind-mate or high-vibration application without additional retention.
Termination is listed as Press-Fit, Solder — the press-fit option means this header can be pressed into plated through-holes without wave solder, useful for backplane assemblies or rework-friendly builds where you want to swap a damaged header without desoldering. The overall contact length of 0.582" (14.78mm) with a 0.177" (4.50mm) post gives enough tail length for standard 1.6mm PCBs plus a solder fillet or press-fit interference zone.
Compliance and Materials
The insulation colour is black, standard for the BERGSTIK series.
No official cross-reference or pin-compatible alternative is on record for this exact order code — the BERGSTIK series offers the same pitch in other position counts, but a 10-position unshrouded dual-row header is what this line calls for.