Skip to main content
Log in
93690-103-10LF — Amphenol product photo
Amphenol

Amphenol BERGSTIK 93690-103-10LF, 10-pos 2.54mm Header

MPN93690-103-10LF
Active

Amphenol BERGSTIK 93690-103-10LF, 10-position, dual-row, 0.100" (2.54 mm) pitch unshrouded breakaway header, male pin, through-hole press-fit and solder termination, rated 5 A per circuit at 110 V, gold GXT on mating interface, tin on post, black thermoplastic housing, UL94 V-0.

$0.6582Ref. price · indicative, final on quote
93690-103-10LF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

93690-103-10LF Technical Specifications
ParameterValue
SeriesBERGSTIK®
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader, Breakaway
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialCopper Alloy
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board or Cable
PackageBag
ShroudingUnshrouded
TerminationPress-Fit, Solder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions10
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.177\" (4.50mm)
Overall contact length0.505\" (12.83mm)
Contact finish - matingGold, GXT™
Contact length - mating0.224\" (5.70mm)
Contact finish thickness - post39.4µin (1.00µm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The Amphenol BERGSTIK 93690-103-10LF is a 10-position, dual-row unshrouded breakaway header on the standard 0.100" (2.54 mm) pitch. The mating interface uses gold GXT plating (30.0 µin), while the post gets a tin finish (39.4 µin). That gold-on-mating side handles repeated connect-disconnect cycles; the tin post is the standard solder-tail finish for a reliable joint.

The 0.100" (2.54 mm) pitch and 0.100" (2.54 mm) row spacing put this header on a standard 0.100" grid.

The press-fit tail is designed for through-hole boards; the solder step is the primary current path. The square pin contact shape gives four-point wiping in a standard female socket. All 10 positions are loaded — no skipped or dummy pins.

Frequently asked questions

What is the pitch of Amphenol 93690-103-10LF?

The pitch is 0.100" (2.54 mm), which is the standard DIP spacing — this header drops into a 0.100" grid without a custom footprint.

Is 93690-103-10LF a through-hole or SMT connector?

It is a through-hole connector with a press-fit tail that also takes solder — the press-fit holds alignment during wave solder, and the solder joint carries the current.

Does 93690-103-10LF have a polarized or keyed housing?

No — it is an unshrouded header with push-pull fastening, so there is no keying or polarization. The breakaway design lets you snap to length for odd-position needs.

What is the current rating of 93690-103-10LF?

Rated 5 A per circuit at 110 V — a solid signal-level rating, enough for low-power distribution but not a bus bar.