The Amphenol FCI 93939-130HLF is a 30-position, dual-row board-to-board header from the BERGSTIK II series. It uses a 0.100" (2.54 mm) pitch on both the mating interface and row spacing, which is the standard footprint for legacy and industrial board-stacking designs. The right-angle through-hole orientation places the pins parallel to the PCB, making this header a fit for board-edge applications where the cable exits along the board plane rather than perpendicular to it. Rated 5 A per contact at 110 V, the current capacity is typical for a 0.100" pitch unshrouded header — the limiting factor is the pin density and the PCB trace width, not the contact itself. The mating interface carries a gold or GXT finish at 30.0 µ" (0.76 µm) thickness, which supports repeated mating cycles without the fretting corrosion you get from tin-on-tin in low-insertion-force designs. The solder tails are tin-plated for a reliable solder joint with standard lead-free profiles. The push-pull fastening and unshrouded design mean this header mates with standard 0.100" pitch female socket strips — no locking ramp, so it's best suited for internal harnesses where the connector won't see vibration or accidental disconnection. The UL94 V-0 black housing and phosphor bronze contacts meet the flame and material requirements for equipment inside an enclosure.
Where it fits on the board
The 0.100" pitch matches the 2.54 mm grid. The 30 positions, all loaded, give a 2x15 matrix.