Skip to main content
Log in
93939-148HLF — Amphenol product photo
Amphenol

93939-148HLF BergStik II Header, 48 Pos, 0.100" Pitch, 5A

MPN93939-148HLF
Active

Amphenol ICC BergStik® II unshrouded header, 48 positions, dual-row, 0.100" (2.54mm) pitch, right-angle through-hole, 5A, gold or GXT™ mating finish, tin post.

$6.7800Ref. price · indicative, final on quote
93939-148HLF datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

93939-148HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.190\" (4.83mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions48
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.120\" (3.05mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.160\" (4.06mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

The Amphenol ICC 93939-148HLF is a 48-position, dual-row BergStik® II unshrouded header on the standard 0.100" (2.54mm) pitch. Rated 5A per contact at the stated voltage rating of 110V, with the 0.100" pitch providing adequate creepage for that voltage in clean indoor environments. The solder tails are tin-plated phosphor bronze, a standard combination for reliable soldering into plated through-holes.

Footprint and board layout

The 0.100" row spacing matches the standard DIP grid, so the footprint occupies a 2 x 24 hole pattern on 0.100" centers. The post length is 0.120" (3.05mm), which suits PCB thicknesses in the 0.062" to 0.093" range with standard through-hole solder fillet. This is typical for BergStik headers used with IDC ribbon cable connectors or low-vibration board stacking where a separate locking mechanism is not required.

Frequently asked questions

What is the pitch of the 93939-148HLF?

The pitch is 0.100" (2.54mm) for both the pin-to-pin spacing and the row-to-row spacing, matching the standard DIP grid footprint.

What is the difference between 93939-148HLF and 93939-148H?

The 93939-148HLF and 93939-148H share the same 48-position, dual-row BergStik II header body. The suffix difference typically indicates a variation in contact finish or packaging — the -148HLF carries gold or GXT™ on the mating surface with tin on the post, while the -148H may carry a different plating combination. Confirm the exact plating grade against your application's mating cycle and environmental requirements before substituting.