Skip to main content
Log in
94063-416HLF — Amphenol product photo
Amphenol

94063-416HLF Amphenol ICC (FCI) BergStik II Header, 16-Pos

MPN94063-416HLF
Active

Amphenol ICC (FCI) BergStik® II, unshrouded header, 16 circuits, 0.100" (2.54 mm) pitch, single row, through-hole solder termination, tin-plated male pins, rated 3 A per contact, UL94 V-0 black housing.

$2.0578Ref. price · indicative, final on quote
94063-416HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

94063-416HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Current rating3A
Operating temperature-65°C~130°C
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.100\" (2.54mm)
Positions16
Contact finish - postTin
Contact length - post0.138\" (3.50mm)
Overall contact length0.376\" (9.55mm)
Contact finish - matingTin
Contact length - mating0.138\" (3.50mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

0.100" Pitch, 16-Position Single-Row Header

The 94063-416HLF: This is a BergStik® II unshrouded header from Amphenol ICC (FCI), configured as a 16-position single-row through-hole component. Tin plating is suited for applications with infrequent mating cycles — typically under 50 cycles — where the lower cost outweighs the need for gold's corrosion resistance. The phosphor bronze base material provides adequate spring retention for the pin-to-receptacle interface. The UL94 V-0 housing supports use in equipment requiring a flammability rating for the enclosure interior.

Board-to-Board Fit and Mating Half

In vibration-prone environments, a secondary retention method (such as a wire-to-board housing with a latch) should be considered. The header is not sealed and is intended for dry, indoor use.

Frequently asked questions

Can 94063-416HLF be used for wire-to-board connections?

No — this is a board-to-board header. It mates with a female socket strip or IDC receptacle on another PCB. For wire-to-board applications, a shrouded header with a latching housing and crimp terminals (such as the BergStik® II shrouded variant or a dedicated wire-to-board series) would be required.