Skip to main content
Log in
95278-801-38 — Amphenol product photo
Amphenol

95278-801-38 BERGSTIK Header, 38-Pin 2.54mm SMT Obsolete

MPN95278-801-38
Obsolete

Amphenol ICC (FCI) BERGSTIK series, 95278-801-38, unshrouded male pin header, 38 circuits, dual-row, 0.100" (2.54 mm) pitch, surface mount, Gold GXT mating finish, UL94 V-0, bulk.

$3.9706Ref. price · indicative, final on quote
95278-801-38 datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

95278-801-38 Technical Specifications
ParameterValue
SeriesBERGSTIK®
GenderMale Pin
Mounting typeSurface Mount
Connector typeHeader, Breakaway
Fastening typePush-Pull
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Insulation materialThermoplastic
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBulk
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions38
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin-Lead
Contact finish - matingGold, GXT™
Contact length - mating0.232\" (5.90mm)
Contact finish thickness - post150.0µin (3.81µm)
Contact finish thickness - mating15.0µin (0.38µm)

Product details

38-Pin Dual-Row Footprint for Board-to-Board Stacking

The 95278-801-38: The male square pins are 0.232" (5.90 mm) long on the mating side, suited for board-to-board stacking where the mating receptacle sits parallel to the PCB. The solder tails are tin-lead (150.0 µinch), a legacy finish that requires leaded solder processes. Surface mount termination and a push-pull fastening type mean the header sits flush on the board without through-holes, saving board area but relying on the solder joint for mechanical retention — no board locks are listed, so the mating receptacle's latch must handle cable strain.

Obsolete — Sourcing Path and Replacement Guidance

Buyers should verify the BOM position count and footprint against any proposed substitute.

The push-pull retention means no locking latch; in vibration-prone assemblies, a shrouded header or added strain relief is recommended.

Frequently asked questions

What is the replacement for Amphenol FCI 95278-801-38?

A pin-compatible substitute would need to match the 38-position dual-row 0.100" pitch, unshrouded SMT footprint, and Gold GXT mating finish — verify the BOM position count and board layout before substituting.