Skip to main content
Log in
95687-106HLF — Amphenol product photo
Amphenol

95687-106HLF Bergstik II Header, 6 Pos, 0.100" Pitch, 5A

MPN95687-106HLF
Active

FCI / Bergstik® II, Board to Board Header, 95687-106HLF, 6 Positions, 2 Rows, 0.100" (2.54mm) Pitch, Through Hole, Solder Termination, 5A, 110V, Gold 30.0µin Mating.

$1.3900Ref. price · indicative, final on quote
95687-106HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

95687-106HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions6
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.360\" (9.14mm)
Overall contact length0.820\" (20.83mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.360\" (9.14mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

Board-to-Board Header, 6 Positions, 0.100" Pitch

The FCI 95687-106HLF is a 6-position, dual-row Bergstik® II unshrouded pin header. It uses a standard 0.100" (2.54mm) square grid — the same pitch and row spacing — so it lands on a familiar footprint for prototyping or production. The mating contacts are phosphor bronze with 30.0µin (0.76µm) gold plating on the mating surface — enough gold for repeated mating cycles in environments where tin would fret. The through-hole solder tails are 0.360" (9.14mm) long, giving good standoff for wave-solder cleaning.

Frequently asked questions

What is the exact pitch and row count of 95687-106HLF?

The 95687-106HLF is a dual-row header with 0.100" (2.54mm) pitch on both the rows and the row spacing — 6 positions loaded across 2 rows.

Can I use 95687-106HLF with standard Bergstik II female sockets?

Yes — the 95687-106HLF is an unshrouded Bergstik® II male pin header and mates with standard Bergstik II female socket strips of the same pitch and position count.

What is the lifecycle status of 95687-106HLF?

The 95687-106HLF carries an Active lifecycle status per the manufacturer — full production, no end-of-life notice.