Skip to main content
95687-110HLF — Amphenol product photo

Amphenol FCI 95687-110HLF BERGSTIK II Header, 10 Pos, 5 A

MPN95687-110HLF
Active

Amphenol FCI BERGSTIK® II 95687-110HLF, dual-row unshrouded header, 10 positions, 0.100" (2.54mm) pitch, through-hole solder termination, male pin, 5 A per circuit, gold-plated contacts 30 µin.

$2.4800Ref. price · indicative, final on quote
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

95687-110HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions10
Row spacing - mating0.100\" (2.54mm)
Contact length - post0.360\" (9.14mm)
Overall contact length0.820\" (20.83mm)
Contact finish - matingGold or Gold, GXT™
Contact length - mating0.360\" (9.14mm)
Contact finish thickness - mating30.0µin (0.76µm)

Product details

BERGSTIK II Header, 10 Positions, 0.100" Pitch

The black UL94 V-0 housing means it's accepted inside equipment enclosures that require a flammability rating.

The 5 A per circuit is a solid signal-level current; if you're pulling near that continuously, derate above room temperature per the standard curve, but for most logic and low-power duty it's running well below its limit. It's a field-service-friendly spec — you can re-pin on site if needed, because the unshrouded pins are accessible and the header is a standard through-hole part.

How It Sits Against a Sibling

The 10-position header is the match when the BOM calls for 10 circuits.

Frequently asked questions

What is the current rating of the 95687-110HLF?

The 95687-110HLF is rated for 5 A per circuit. This is a signal-level current rating; derate above ambient temperature per the standard connector derating curve.