FCI 95687-112HLF BERGSTIK II Header, 12 Pos, 0.100" Pitch

The FCI 95687-112HLF is a 12-position, dual-row unshrouded male pin header from the BERGSTIK® II series, designed for board-to-board interconnect. It uses the standard 0.100" (2.54 mm) square grid on both pitch and row spacing — the same footprint as legacy 0.100" headers, so it drops into existing layouts without a board respin. All 12 positions are loaded, giving you a full 2x6 matrix for signal or low-power distribution. Rated 5 A per contact at 110 V, with 30.0 µ" (0.76 µm) of gold or GXT™ on the mating surface over phosphor bronze. That plating thickness is the real story here — 30 µ" gold handles repeated mating cycles without the contact fretting you'd see with thin flash gold or tin. It's a signal-grade interconnect, not a power bus; the 5 A per contact is comfortable for logic-level supplies and I/O lines, but derate if you're pushing all 12 circuits near the limit in a warm enclosure. Through-hole solder termination, push-pull fastening, and a black UL94 V-0 rated housing. The unshrouded design means the pins are exposed — standard for a BERGSTIK header that mates with a receptacle or shroud. Overall contact length is 0.820" (20.83 mm), with 0.360" (9.14 mm) of that in the mating tail and the same in the post. That's a typical length for a through-hole header on a standard 0.062" board.