The Amphenol 95687-130HLF is a 30-position, 2-row unshrouded male header from the BERGSTIK II series. It uses a 0.100" (2.54mm) pitch on both the pin-to-pin and row spacing, which is the standard footprint for legacy and new board-to-board designs. The push-pull fastening means it relies on friction from the mating receptacle's contacts for retention — no latch, no lock.
Rated 5A per circuit at 110V, with the 30-position count matching the BOM line for a 30-conductor interconnect. The 30.0µin (0.76µm) gold plating on the mating surface is the real story here — that thickness supports repeated mating cycles and resists corrosion in industrial or mildly corrosive environments better than a thin flash or tin finish. Through-hole solder termination with a 0.360" (9.14mm) post length — that's a standard length that will clear most double-sided boards and sit well in a 0.062" to 0.093" board thickness. The overall contact length of 0.820" (20.83mm) means the mated pair will have a reasonable stack height, but you should verify the receptacle's mating depth against your board-to-board spacing budget.
Where It Goes and What It Mates With
This is a board-to-board header — it sits on one PCB and mates with a receptacle or socket strip on the other board. The unshrouded male pins mate with any standard 0.100" pitch female socket strip that has the same 2-row, 30-position layout.