The FCI 95687-168HLF is a 68-position unshrouded BergStik® II header on the standard 0.100" (2.54 mm) pitch, dual-row, through-hole. It's a straight male pin header with push-pull fastening, designed for board-to-board stacking where you need a high pin count on a legacy footprint. Rated 5 A per contact at 110 V, with 30.0 µin (0.76 µm) gold or GXT™ plating on the mating surface, it handles signal duty comfortably and can carry moderate power on a few pins without worrying about temperature rise.
At 68 positions in two rows, the overall length of the header is about 3.4 inches, so plan for that board real estate. The 0.100" row spacing means you can route a trace between the rows on a standard two-layer board without squeezing. The 0.360" (9.14 mm) mating pin length gives you a solid wipe on the receptacle contact, and the 0.360" post length is long enough to clear a standard 0.062" board with room for a solder fillet.
The 95687 base number covers the dual-row BergStik II family, so if you need a different position count at the same pitch, the same footprint pattern applies.