BERGSTIK II Header, 22 Positions, 0.100" Pitch
It uses a 0.100" (2.54mm) pitch on both the pin-to-pin and row-to-row spacing, which sets the board footprint for a standard 0.100" grid layout. The through-hole solder termination and square male pins make this a general-purpose board-to-board interconnect for signal or moderate power duty.
The 110 V voltage rating matches the creepage distance the 0.100" pitch provides on a standard FR-4 board.
Board Layout and Mating
The overall contact length is 0.820" (20.83 mm), with 0.360" (9.14 mm) on the mating side and 0.360" (9.14 mm) as the solder post.