Skip to main content
Log in
95687-430HLF — Amphenol product photo
Amphenol

FCI 95687-430HLF BERGSTIK II Header, 30 Pos, 0.100" Pitch

MPN95687-430HLF
Active

FCI BERGSTIK® II Series, Board-to-Board Header, 30 Positions, 0.100" (2.54mm) Pitch, 2 Rows, 0.100" Row Spacing, Through Hole, Solder Termination, Tin Plated, Unshrouded, UL94 V-0.

$5.0800Ref. price · indicative, final on quote
95687-430HLF datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

95687-430HLF Technical Specifications
ParameterValue
SeriesBERGSTIK® II
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typePush-Pull
Voltage rating110V
Current rating5A
Contact materialPhosphor Bronze
Insulation colorBlack
Insulation height0.100\" (2.54mm)
Material flammability ratingUL94 V-0
StyleBoard to Board
PackageBag
ShroudingUnshrouded
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.100\" (2.54mm)
Positions30
Row spacing - mating0.100\" (2.54mm)
Contact finish - postTin
Contact length - post0.360\" (9.14mm)
Overall contact length0.820\" (20.83mm)
Contact finish - matingTin
Contact length - mating0.360\" (9.14mm)
Contact finish thickness - mating100.0µin (2.54µm)

Product details

The FCI 95687-430HLF is a 30-position, dual-row, unshrouded male pin header from the BERGSTIK® II series, on the standard 0.100" (2.54mm) pitch. The 0.100" pitch and 0.100" row spacing put this on the classic 0.1" grid, so it fits breadboard layouts and legacy PCB patterns.

Every pin lands on a 0.1" grid, so the PCB layout is straightforward with standard drill sizes. The unshrouded header has no keying — the mating receptacle can be installed in either orientation, so the board layout or harness design must prevent a 180° mis-mate.

The overall contact length is 0.820" (20.83mm), with 0.360" (9.14mm) of that as the mating pin and 0.360" (9.14mm) as the solder post, giving a reasonable standoff height above the board.

Frequently asked questions

What is the pin pitch of the 95687-430HLF?

The pin pitch is 0.100" (2.54mm), with a row spacing of 0.100" (2.54mm) — the standard 0.1" grid.

Is the 95687-430HLF shrouded or unshrouded?

It is unshrouded — there is no polarization ramp or keying feature. The mating receptacle can be installed in either orientation, so the board layout must prevent a 180° mis-mate.