The Amphenol ICC BERGSTIK® II 95687-452HLF is a 52-position, dual-row, unshrouded male pin header. The through-hole solder tails are 0.360" (9.14mm) long, sized for a 0.062" to 0.093" PCB thickness. This is a straightforward board-to-board interconnect — no latch, no shroud, no polarization. The tin-on-tin contact system (100.0µin / 2.54µm on the mating side) is rated for 5A per circuit at 110V, which puts it in the signal-and-light-power class.
Within the BERGSTIK® II family, the 95687-452HLF sits at 52 positions — a full dual-row count that matches a 52-circuit BOM line. The unshrouded design is the simplest in the series: no keying, no locking ramp, just the pins and the black UL94 V-0 housing. For a clean board-to-board signal interconnect where the mating half is aligned by the board stack, this header does the job without adding cost or board-space overhead.
Tin-on-tin contacts are not suited for frequent field service or corrosive atmospheres; if the application demands repeated reconnections or lives in a humid cabinet, a gold-plated sibling in the BERGSTIK® II range would be the better pick.