The Amphenol 95687-462HLF is a 62-position, dual-row, unshrouded male pin header from the BERGSTIK® II series, on the standard 0.100" (2.54 mm) pitch that defines this long-running board-to-board family. Contacts are phosphor bronze with a 100.0 µ" (2.54 µm) tin finish on the mating surface and tin on the solder posts — a cost-effective plating choice for applications that don't require the corrosion resistance or cycle life of gold. Rated 5 A per contact at 110 V, with the UL94 V-0 black housing meeting the flame rating required inside most enclosed equipment. The through-hole termination and 0.360" (9.14 mm) post length suit standard PCB thicknesses in a soldered assembly.
As an unshrouded header, this part mates with any standard 0.100" pitch, 2-row female socket or IDC receptacle that matches the 62-position layout — no keying or polarization beyond the pin grid itself. The push-pull fastening means retention relies entirely on the contact friction of the mating receptacle, so it is best suited for internal board-to-board connections where the assembly is not subject to vibration or cable strain.